Descargar Imprimir esta página

KRESS KG753 Manual Del Usuario página 12

Cortacésped manual kress 40v 21' bl

Publicidad

Idiomas disponibles

Idiomas disponibles

MAINTENANCE
WARNING: Stop the mower and remove
batteriesbefore removing the grass
collection bag.
NOTE: To ensure long and reliable service,
perform the following maintenance procedures
regularly. Check for obvious defects such as a
loose, dislodged or a damaged blade, loose fittings,
and worn or damaged components. Check that
the covers and guards are all undamaged and
are correctly attached to mower. Carry out any
necessary maintenance or repairs before operating
mower. If the mower should happen to fail despite
regular maintenance, please call our customer
helpline for advice.
BLADE SHARPENING
KEEP BLADE SHARP FOR BEST MOWER
PERFORMANCE. A DULL BLADE DOES NOT CUT
GRASS CLEANLY OR MULCH PROPERLY.
WEAR PROPER EYE PROTECTION WHILE
REMOVING, SHARPENING, AND INSTALLING
BLADE. ENSURE THE BATTERIES ARE REMOVED.
Sharpening the blade twice during a mowing
season is usually sufficient under normal
circumstances. Sand causes the blade to dull
quickly. If your lawn has sandy soil, more frequent
sharpening may be required.
REPLACE BENT OR DAMAGED BLADE
EN
IMMEDIATELY.
WHEN SHARPENING THE BLADE (See Fig.
M)
M
1. Make sure blade remains balanced.
2. Sharpen blade at the original cutting angle.
3. Sharpen cutting edges on both ends of blade
to keep it balanced, removing equal amounts of
material from both ends.
NOTE:
1. Be sure the mower is turned off and remove
batteries
2. Place the mower in stand up storage mode.
12
BLADE BALANCING (See Fig. N)
N
N-1
N-2
Check balance of blade by placing center hole in
blade N-1 over a screwdriver shank N-2, clamped
horizontally in a vise N-3. If either end of the blade
rotates downward, file that end. Blade is properly
balanced when neither end drops.
BLADE MAINTENANCE (See Fig. O1, O2)
O1
O2
Replace your Mower Blade after 50 hours of
mowing or 2 years of use, whichever comes first.
Follow these procedures to remove and replace the
Blade. You will need garden gloves (not provided)
and a spanner wrench (not provided) to remove the
Blade. Make sure batteries are not installed. Wedge
N-3

Publicidad

loading

Este manual también es adecuado para:

Kg753.x