Publicidad
Idiomas disponibles
Idiomas disponibles
a block of wood between the blade and the mower
deck to prevent the blade from turning and unscrew
the blade bolt counter-clockwise using a spanner
wrench, and then remove the blade.
To re-assemble, position the blade with the cutting
edges towards the ground. Then securely tighten
the blade bolt.
STORAGE (SEE FIG. L1, L2)
Stop the mower and remove batteries. Clean the
exterior of the machine thoroughly using a soft
brush and cloth. Do not use water, solvents or
polishes. Remove all grass and debris, especially
from the ventilation slots.
Turn the machine on its side and clean the blade
area. If grass cuttings are compacted in the blade
area, remove with a wooden or plastic implement.
Store the machine in a dry place. Do not place
other objects on top of the machine.
To aid storage, pinch the quick-release button and
pull it out, and then rotate the quick-release button,
and fold the Handle bar. The mower can also be
stored in a vertical orientation to conserve space
(fig. K2).
NOTE: After the Handle bar is folded, the quick-
release button needs to be screwed back into
place.
FOR BATTERY TOOLS
The ambient temperature range for the use and stor-
age of tool and battery is 32 ℉~113 ℉ (0 ℃~45 ℃).
The recommended ambient temperature range for
the charging system during charging is 32 ℉~104 ℉
(0 ℃~40 ℃).
TECHNICAL DATA
Type
KG753 KG753.X (753 -designation of
machinery, representative of Mower)
Voltage
No load speed
Deck diameter
Cutting diameter
Front wheel diameter
Rear wheel diameter
Cutting height
Cutting height positions
Grass collection
capacity
KG753 KG753.X **
40 V
MAX.
(2x20 V Max.)
***
2800/3000 /min
21" (53 cm)
20" (51 cm)
8" (200 mm)
10" (250 mm)
1-1/2"~4" (40 ~ 100 mm)
7
2 bushels (70 L)
Battery type
Machine weight
(Bare tool)
**X may be followed by one or two characters. All
models are the same except model number and
trademark.The suffix in models may be number from
"1" to "999" or English letter "A" to "Z" or "M1" to"
M9" which means different package or the various of
accessories packed in the package.
***Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal volt-
age is 18 volts.
SUGGESTED BATTERIES
AND CHARGERS
Category
Type
20V Battery
KAB08
20V Charger
KAC04
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
TROUBLE SHOOTING
Problem
A. Release operating bail
to turn mower off. Remove
batteries. Turn mower
over and check that blade
is free to turn. If not free,
contact customer service.
Blade should turn freely.
Also ensure the mower is
not sitting in tall grass that
may prevent the blade from
1. Mower
starting to spin. If so, move
doesn't run when
the mower into an area where
operating bail is
it isn't under load to start.
activated.
B. Has battery been fully
charged? Plug in charger
and wait for green light to
come on.
C. For starting, press and
hold the safety lock-out
button, then pull back the
operating bail handle while
continuing to hold the safety
lock-out button. (See Fig. J1)
Lithium-Ion
50 lbs (22.7 kg)
Capacity
8.0 Ah
4.0 A
Solution
EN
13
Publicidad
