Service tasks
9.3
Changing the dryer filter
1. In the basic menu, use the cursor keys
"Free selection":
2. Press ENTER to confirm.
3. Skip the query requesting "CAR DATA".
4. Select "Rec/Recycling phase".
5. Set the "Pressure increase test time min." to "1".
Press ENTER to confirm.
6. Deselect "Vacuum phase" using "No".
Press ENTER to confirm.
7. Deselect "Filling phase?" using "No".
Press ENTER to confirm.
8. Select "Start processes?".
Press ENTER to confirm.
The service hoses will now be drained and the AirCon Service Center
basic menu will be activated. The compressor has produced a slight
internal vacuum so that the filter can be replaced with minimal refriger-
ant loss.
WARNING!
!
Switch off the AirCon Service Center and unplug it from the power supply
before opening the housing.
9. Switch off the unit.
10. Pull out the mains plug.
11. Remove the rear cover.
108
Short selection
Free selection
Other selections
ENTER-OK
AirConServiceCenter
or
to select
EN