AirConServiceCenter
2. Press STOP.
3. Connect the waste container to the waste terminal and press ENTER
to confirm.
4. Once the AirConServiceCenter has disposed of the sample, dis-
connect the AirConServiceCenter from the vehicle and drain the
service hoses.
5. Switch off the unit and take unit outside.
CAUTION!
!
Wear protective gloves and goggles.
6. Loosen the high and low pressure service connection carefully and re-
lease the gas.
7. Verify the analysis unit of the AirConServiceCenter: see chapter "Veri-
fying the analysis unit" on page 86.
EN
Contact the vehicle
manufacturer!
ENTER-OK
Initial start-up
85