ECOVACS Goat G1 Manual De Instrucciones página 13

2 Specific Maintenance
1. Replace the Blades
WARNING
Remember to power off GOAT before operation. ALWAYS wear protective gloves when replacing the Blades. Please only use the Blades
manufactured by ECOVACS and use new screws when assembling Blades.
• Power off GOAT.
PUT ON THE PANORAMIC CAMERA COVER AND LAY SIGNAL RECEIVER DOWN .
•
GENTLY TURN GOAT OVER ON A SOFT SURFACE.
•
• Loosen the Screws with the supplied screwdriver.
• Remove the Screws and Blades.
• Tighten the new Blades and Screws. Make sure that the Blades can spin freely.
13 EN