Stihl iMOW 5.0 EVO Manual De Instrucciones página 88

English
4
5
► Remove the nut (4).
► Remove the blade disk (5).
6
► Push the blade carrier (6) in the direction indi‐
cated by the arrow
The blade carrier (6) is unlocked.
► Remove the blade carrier (6).
7
7
► Detach all old blades (7).
5
► Clean, blade disk (5), blade carrier (6) and
nut (4).
88
.
7
4
6
8
8
► Attach new blades (8). Insert only one blade
per L-pin (9).
6
► Put on the blade carrier (6).
► Push the blade carrier (6) in the direction of
the arrow and make sure that all three
arms (10) underneath the L-pins (9) are posi‐
tioned.
The blade carrier (6) is locked.
► Position the blade disk (5) on the robot mower.
► Press and hold the lever (3).
► Turn the nut (4) clockwise.
► Release the lever (3) and tighten nut (4)
securely clockwise.
The levers (3) engage audibly.
21 Repairing
21.1 Repairing the robotic mower,
battery, mowing unit, docking
station and power supply
Users cannot repair the robotic mower, battery,
docking station and power supply themselves.
Damaged or worn blades and the mowing unit
can be replaced.
► If the robotic mower, battery, docking station,
charging cable, power supply or connecting
cable is damaged: Do not use the robotic
mower, battery, docking station, charging
cable, power supply or connecting cable and
contact a STIHL authorized dealer.
► If a blade is damaged or worn:
► Stop the robot mower and activate the
device lock.
► Replace all blades. The blades cannot be
re-sharpened.
21 Repairing
9
8
9
10
10 10
0458-012-9801-A