Publicidad
Idiomas disponibles
Idiomas disponibles
The following safety instructions are addressed to both the operator of the
machine as well as the person in charge of maintenance. The user shall
operate the machine only after being well acquainted with the safety
procedures described in the present manual. READ THIS MANUAL WITH
ATTENTION.
IMPORTANT
Any change in the protection systems and safety devices during
operation will create serious risks to the operator physical integrity.
Basic Operating Procedures
Dangers
• Some areas of the device have parts that are connected or have parts
connected to high voltage. When touched, these parts may cause severe
electrical shocks or be lethal.
• Follow each operation step in order and ensure everything is running
correctly before proceeding to the next step.
Advice
• In case of power shortage, immediately switch the machine off.
• Use ONLY recommended lubricants, oils or greases.
• Do not shake the product. This may damage the internal electrical
structure. Handle the slicer gently when moving it to another location.
• Do NOT allow water, dirt or dust to come into contact with mechanical
and electrical components of the machine.
• DO NOT change the standard characteristics of the machine.
• DO NOT remove, tear off or maculate any safety or identification labels
stuck on the machine. If any labels have been removed or are no longer
legible, contact Paladin Equipment via the "Contact Us" form at
www.paladinequipment.com for replacement.
Safety Procedures and Notes
- 17 -
Publicidad
