GENERAL SAFETY INSTRUCTIONS
IMPORTANT: It is your responsibility to:
•
Know and follow applicable national, state and local safety codes pertaining
to installing and operating electrical equipment for use with flammable
liquids.
•
Know and follow all safety precautions when handling petroleum fuels.
•
Ensure that all equipment operators have access to adequate instructions
concerning safe operating and maintenance procedures.
Observe all safety precautions concerning safe handling of petroleum fuels
SYMBOLS
2
EN
Description of imminent hazard and failure to avoid hazard will
result in death.
Description of hazard and possible resulting injures or death.
Description of hazard and possible resulting injuries.
This symbol indicates a general warning to the user. See
additional specific warnings.
This symbol indicates electrical shock hazard. Follow proper
installation and maintenance instructions in this manual.
This symbol indicates hot surface. Take care to avoid coming
into contact with hot surface.
This symbol indicates automatic restart. Pump contains
thermal protection which automatically shuts off motor before
overheating. Pump will turn back on automatically after cooling.
Turn switch OFF and wait 30 minutes to resume normal
pumping. Disconnect power before any inspection or service.
Owner's manual must be read before using, inspecting, or
servicing this product.
Disconnect power when product is unattended or in the case
of a malfunction. Disconnect power before any inspection,
servicing, or maintenance.
To prevent physical injury or property damage, observe
precautions against fire or explosion when dispensing fuel. Do
not operate the system in the presence of ignition sources such
as, but not limited to: open flames, lighted cigarettes, running or
hot engines, gas or electric heaters.
gpi.net/my-pump
VEA EL MANUAL DEL
SEE OWNER'S MANUAL FOR DETAILS
PROPIETARIO PARA DETALLES
VOIR LE MANUEL DU PROPRIÉTAIRE
VEJA O MANUAL DO
POUR PLUS DE DÉTAILS
PROPRIETÁRIO PARA DETALHES