Publicidad
11-OPERATION
SITUATION
The blade does not cut or grabs the tape.
The tape is not properly applying on the
back part of the box.
The belts do not drive the box.
The case, although not open at the driving
belts, is pushed by the pushing carriage.
JULY 2004
11-USO DE LA MÁQUINA
CAUSE
Blade dirty with adhesive
Insufficient tape tensioning.
Cutting levers springs not strong enough.
Damaged blade (Broken teeth)
The blade does not cut the tape properly.
The tensioning of the main spring of the
taping unit is insufficient.
Adhesive from the tape building up on the
rollers.
Rubber-coated roller at the exit.
Too low pressure.
Smooth ring on the pulley.
Excessive unrolling tensioning of the tape.
Excessive tensioning of the spring of the
taping unit.
Excessive pressure of the head on the box.
The driving guides are not correctly
positioned.
Incorrect calibration of the sensor
of the vacuum pump.
63
SOLUTION
Clean
Increase the friction brake of the tape
drum.
Replace
Replace the blade
Replace/clean
Adjust the tensioning of the spring.
Clean and lubricate the refeeding rollers.
Replace.
Adjust.
Replace.
Decrease friction on the drum.
Replace.
Adjust the position of the hold down plate.
Check the position of the drive belts.
Adjust the sensitivity of the sensor.
CE-10
Publicidad
