Mettler Toledo SevenGo Duo SG23 Instrucciones De Manejo página 10

Installation
a) To mount the clip, remove the cover over the clip's fixing point using your thumbnail.
b) Attach the clip by pressing it into the recess.
c) Slide the shaft of the sensor into the clip from the top.
d) Rotate the sensor around the clip's axis to switch between the storage and working positions.
3.5 SevenGo™ two-electrode clip
The SevenGo™ two-electrode clip is the ideal accessory for handling two electrodes in the field. Two
elec trode clips can be connected.
Attach the two clips by pressing them into the recesses of the clip connector.
3.6 Attaching the ErGo™
The ErGo™ protects the meter from shocks and safely stores the electrode(s). It is the perfect accessory
for carrying and measuring in the plant or field, and for working comfortably when the meter is placed on
a table or on the ground.
a) Remove the blue bottom cap at the base of the meter.
b) Screw the ErGo™ adapter onto the meter.
c) Mount the ErGo™ as shown in the diagram.
d) Fit the neck strap to both ends of the ErGo™.
6 pH/conductivity meter SG23