Metabo KS 85 Instrucciones De Manejo página 14

00_7920IVZ.book Seite 14 Mittwoch, 8. März 2006 3:07 15
ENG ENGLISH
Wear ear protectors when working with the
machine.
Wear safety goggles when working with the
machine.
Press the spindle locking button only when the
motor is at a standstill.
Do not reduce the speed of the saw blade by
pressing on the sides.
Do not clamp the movable safety guard in the
pulled-back position for the purposes of sawing.
When sawing materials that generate large
quantities of dust, the machine must be cleaned
regularly. Make sure that the safety appliances,
e.g. the movable safety guard, are in perfect
working order.
The movable safety guard must move freely and
return to its final position automatically, easily and
exactly.
Materials that generate dusts or vapours that may
be harmful to health (e.g. asbestos) must not be
processed.
Guide the machine with both hands on the
handles.
Do not reach under the workpiece while the
machine is in operation.
Always work with the splitting wedge in place.
Check the workpiece for foreign bodies. When
working, always make sure that no nails or other
similar materials are being sawed into.
If the saw blade blocks, turn the motor off
immediately.
Do not try to saw extremely small work pieces.
During machining, the workpiece must be firmly
supported and secured against moving.
Large workpieces must be sufficiently supported.
The dust created when working is often harmful to
health (e.g. when working with oak and beech,
being materials which contain harmful substances)
and should not be allowed to enter your body. Use
a dust extractor and in addition wear a suitable
dust protection mask. Thoroughly remove any
dust deposits, e.g. by vacuum cleaning.
Do not use any abrasive wheels.
5 Overview
See page 3 (please unfold).
1 Guide plate
2 Scale (diagonal cut angle)
3 Locking screw (diagonal cuts)
4 Additional handle
14
5 Locking screw (2x) (parallel stop)
6 Cutting indicator
7 Parallel stop
8 Plunge-cut lever (depth of cut)
9 Scale (depth of cut)
10 Clamp lever (depth of cut)
11 Extraction connection piece
12 Trigger
13 Locking button
14 Handle
15 Spindle locking button
16 Depot for hexagon wrench
17 Movable safety guard
18 Inner saw blade flange
19 Handle (movable safety guard)
20 Splitting wedge
21 Allen screw (2x) (splitting wedge setting)
22 Saw blade
23 Outer saw blade flange
24 Saw blade fixing screw
6 Special Product Features
Plunge cuts can be made easily by way of dual
guiding and automatically retracting splitting
wedge.
Double-guided parallel stop.
Mechanical safety brake for stopping saw blade
quickly when switching off the machine.
Sawing close to wall possible.
7 Initial Operation, Setting
Before plugging in check to see that the
rated mains voltage and mains frequency,
as stated on the rating label, match with
your power supply.
Pull the plug out of the plug socket before
any adjustments or servicing are
performed.
7.1 Setting splitting wedge
The splitting wedge (20) prevents the wood from
closing behind the saw blade and jamming it while
the machine is in operation. This could otherwise
lead to recoiling.
The splitting wedge must be set in such a
way that the distance between its inner
curve and the toothed ring on the saw blade