Etac Molift Raiser Pro Manual De Usuario página 7

Make sure both sides are properly settled.
Push up or down until you get the auditiv
feedback click.
Unattached leg support can cause knee support
to slide down and make the Molift Raiser Pro
unsafe to use.
Positioning Molift Raiser Pro
1
1. The user's feet are
placed on the footplate.
Transfering user
1
Brake locked
1. Lock both wheels by
pressing down the brake on
one side. Both wheels lock
regardless of which side
assistant steps on.
Place one foot on the edge
of the base plate. Choose
a grip on the handle that is
comfortable for both assis-
tant and the user.
"Click"
2. Adjust the height of the leg
support so that the top of the
support is below the knee of the
user.
3. When desired height is reached
the leg support "click" in place.
2. Encourage the user to stand
up, at the same time, counter
balancing the users weight using
a foot and hands (use your body-
weight by leaning backwards).
Molift Raiser Pro / BM43099 Rev I / www.etac.com
The wheels must always be locked when the user
stands up and sits down.
2
3
Brake unlocked
3. Release the brake with one
foot.Pull the Molift Raiser
backwards and then steer
it toward the new seating
position. Make sure that any
wheels are locked in the new
seating. The transfer is best
done with the user faced in
the direction of travel.
2
The carer must always counter balance the weight of the
user when she/he stands up or sits down.
Transport and storage
Molift Raiser Pro can be stored and transported under temper-
atures between -25 - 70°C and relative humidity between 15 -
93%. Don`t use the Molift Raiser Pro for transportation of goods.
User / Assistant
The assistant has to be able to handle the weight of the user.
7
3
Brake locked
4. Lock both wheels. Place a
foot on the edge of the foot-
plate before the user sits down.
Counter balance while the user
sits down. Maintain eye contact
with the user during the entire
transfer Process.
4