Publicidad
Idiomas disponibles
Idiomas disponibles
Error Prompts and Solutions
EN
If the appliance is not working properly, the screen display will show an error message.
Please refer to the troubleshooting table to find your solution.
Error Icon
Possible Cause
Insufficient water in the
Clean Water Tank
The Used Water Tank is
full
Brush roller stuck
Blocked tube
The brush roller and
tube are dirty
Error Code
Possible Cause
E1-E7
Error
H1-H6
H7
Battery overheating
17
17
Solution
Fill the Clean Water Tank
Empty the Used Water Tank
Clean the brush roller with the provided
cleaning brush
Check whether the filter is clogged
Alternatively, clean the tube and the dirt
sensor
Place the appliance back onto the base
for self-cleaning
Solution
Restart the appliance for troubleshooting.
If the problem persists, please contact
customer service
Wait until the battery's temperature
returns normal
Specifications
Wet and Dry Vacuum
Model
HHR27C
Rated Voltage
21.6 V
Rated Power
300 W
Charging Base
Model
HCBC
Rated Input
220-240 V
50-60 Hz
*The rated input power of the charging base is measured when the drying function and
the charging function are turned on at the same time.
Approx. 4 hours
Charging Time
(including drying)
Approx. 30
Drying time
minutes
Charging Voltage
27 V
Used Water Tank
700 mL
Capacity
Clean Water Tank
900 mL
Capacity
Rated Input Power*
234 W
Rated Output
27 V
1.6 A
EN
18
18
Publicidad
