Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
EN
Assembly and Disassembly of Handle
Insert the end of the handle vertically into the port on the top of the appliance as
indicated until you hear a click.
Click
Note: To disassemble, press the contacts in the hole on the back of the appliance with the
appropriate tool and pull the handle upwards at the same time.
Installing the Solid Waste Filter Basket
Remove the used water tank and pull up the tank cover to install the solid waste filter
basket.
Note: If the solid waste filter basket is not installed, other functions can operate normally except that
the solid waste cannot be separated.
7
7
2
1
Charging
Place the charging base against a wall on level ground and connect it to a
1.
power source. Fully charge the appliance before first use.
Place the appliance on the charging base. When charging, the number on the display
2.
screen represents the current battery level as a percentage. When the number reaches
100, the battery is fully charged.
Note:
• If there is no operation within 10 minutes of being fully charged, the vacuum will enter sleep
mode. Please restart the appliance if you need to use it.
• To extend the battery life time, the battery keeps cooling down for about one hour automatically
after you have used the appliance for a long time.
EN
8
8
Publicidad
