emmeti MIRAI - SMI 4.0 Manual De Instrucciones página 90

4. WARNINGS 1. DESCRIZIONE DEI COMPONENTI
4.3 Prohibitions and warnings for installation
CAUTION
The installation and maintenance activities performed on heat
pumps may only be carried out by personnel and companies hold-
ing the appropriate certificate in accordance with EU regulation
2015/2067 which establishes, in accordance with EU Regulation
517/2014 of the European Parliament and of the Council, the
minimum requirements of companies and personnel for stationary
refrigeration, air conditioning and heat pumps containing certain
fluorinated greenhouse gases.
Install in rooms where gas leaks or
other flammable substances may
occur near the unit
Install near obstacles or plants that
may obstruct the normal air flow of
the unit
Install in a place exposed to strong
wind that may hinder normal air-
flow.
Use an exclusive power
source for the heat pump
and a properly sized
magnetothermal
differential switch.
90
DANGER CUTTING: USE OF ADJUSTABLE GLOVES.
IF THE CONDITIONS RESPECTED ARE REQUIRED
STANDARDS FOR WORKS IN SHARE.
- Installation must only be carried out by qualified and authorised technicians.
- Do not attempt to install the device on your own initiative.
- For repairs contact the Technical Support Team Certified. Electrical
repairs must be carried out by qualified electricians.
- Unsatisfactory work may result in serious damage to the user.
- The list of technical support centres is available on the following website:
www.emmeti.com.
Correct installation guarantees efficient use.
Therefore, we ask you to carefully abide by the instructions in relation
to installation, connections and testing as they are documented in this
manual.
PROHIBITION OF:
Install near sources of
heat or steam (water,
oils, etc.)
Install on inadequate or in
poor condition supports
Install in an environment that
is not completely open
(under the stairs, basement
window)
WARNINGS
Choose a suitable location for
the installation so that the noise
emitted does not inconvenience
people or animals.
Pay attention to the hot surfaces
of the unit during maintenance
EN EN