Create Wind Calm Patio Manual De Instrucciones página 10

IN STAL L ATION P RE PAR AT IO N
• To avoid personal injury and injury, ensure that the fan is hung in a location that allows the
blades to be 2.3 m or more from the floor and 76 cm from the nearest wall or obstacle.
• Make sure the mounting bracket is properly attached to the building structure and can
support the full weight of the fan.
FIX I NG TH E MOU NTI NG B R ACKE T
• Check that the ceiling where you intend to mount the fan is stable and capable of safely
supporting the weight of the fan.
• Do not fix the mounting bracket directly on ceilings less than 10mm to avoid the risk of the
screw loosening and coming out.
Wood roof
Drill the necessary holes and then secure
the rain cover and mounting bracket with the
wood screws and washers to the roof joints.
NOTE: This fan can also be installed in a false ceiling, for this you must use fixing screws
with spring lever (not included).
E NGL I SH
10
INSTALLATION INSTRUCTIONS
76 cm
Waterproof cover
76 cm
2.3 m
Concrete roof
Drill holes with an 8mm drill bit, accord-
ing to the length of the expansion screws.
Next, secure the waterproof cover and
mounting bracket to the ceiling with the
expansion screws.