MIRKA 1230 L Instrucciones De Manejo página 73

Storage
Caution: Store the appliance in a dry place, protected from rain and frost. The machine must be stored indoors
only.
Accessory and tool storage
For convenient transport and storage of accessories or tools, integrated rails are provided on the side of the machine,
which allow fastening with straps or some other means. A flexible strap and hooks are included at the back of the machine
for hanging the suction hose or mains cable. For instructions, see quick reference guide.
An optional case fastening accessory with attachment system can be installed on top of the machine for fastening of
2-point or 4-point storage cases. Unplug from the socket before installing the case fastening accessory.
Caution: Do not lift machine and case fastening accessory without ensuring that the storage case is safely
installed. Note the weight and balance of the appliance in case of storage. Maximum weight of storage cases
is 30 kg.
Maintenance
Regular servicing and inspection
Regular servicing and inspection of your dust extractor must be carried out by suitably qualified personnel in accordance
with relevant legislation and regulations. In particular, electrical tests for earth continuity, insulation resistance, and
condition of the flexible cord should be carried out frequently.
In the event of any defect, the dust extractor MUST be withdrawn from service, completely checked and repaired by an
authorized service technician. At least once a year, a Mirka technician or an instructed person must perform a technical
inspection including filters, air tightness and control mechanisms.
Maintenance
Remove the power cord from the mains socket before performing maintenance. Before using the dust extractor make
sure that the frequency and voltage shown on the rating plate correspond with the mains voltage.
The dust extractor is designed for continuous heavy work. Depending on the number of running hours the dust filter
should be renewed. Keep the dust extractor clean with a dry cloth or a damp cloth from water.
During maintenance and cleaning, handle the dust extractor in such a manner that there is no danger to maintenance
staff or other persons. In the maintenance area:
Use filtered compulsory ventilation.
Wear protective clothing.
Clean the maintenance area so that no harmful substances get into the surroundings.
During maintenance and repair work all contaminated parts that cannot be cleaned satisfactorily must be:
Packed in well-sealed bags.
Disposed of in a manner that complies with valid regulations for such waste removal.
If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
For details of after sales service, contact your dealer or Mirka service representative responsible for your country. See
reverse of this document.
Spare parts and accessories
Description
Filter element
Fleece filter bag (5 pcs)
Disposal bag (5 pcs)
Motor cooling filter
Motor cooling filter PET
Case fastening accessory
Pneumatic box 230 V
Mirka code
8999100411
8999100211
8999110311
8999110111
8999110211
8999110411
8999101011
Mirka® Dust Extractor 1230 L - PC & AFC
en (original)
73