Press the zone selection button (36) to configure the settings for fryer drawer
(16).
Press the DIY button (26) to make the setting manually. The default setting is a
cooking time of 15 minutes and a temperature of 180°C.
You can adapt an automatic programme (see following section) or the default set-
ting specified above to suit your recipe.
Use the
(31) and
in 5°C increments. Press and hold the button longer to set the required tempera-
ture more quickly.
The temperature in °C is shown on the display field (23) for fryer drawer 1 and on the
display field (24) for fryer drawer 2.
The temperature is saved.
Cooking temperatures of between 50 °C and 200 °C can be set.
Use the
(32) and
ute increments. Press and hold the button longer to set the required cooking
time more quickly.
The cooking time is shown on the display field (22) for fryer drawer 1 and on the dis-
play field (23) for fryer drawer 2.
It is possible to set a maximum cooking time of 60 minutes.
The cooking time is saved.
Press the zone selection button (27) to configure the settings for fryer drawer
(15). Then set the cooking time and temperature. Proceed as described above.
Start the cooking process by pressing the
You can also begin by configuring the settings for zone .
The cooking process starts for both fryer drawers with the respective settings. The
button
(29) flashes during the cooking process.
(25) buttons to set the cooking temperature you require
(24) buttons to set the cooking time you require in min-
button (29).
DE
FR
NL
ES
IT
EN
191