Publicidad
Idiomas disponibles
Idiomas disponibles
6) FIELD Button: When in the "EDIT" mode, pressing the FIELD button will
scroll through the available functions.
7) Right Arrow Button: Selects the setting to be adjusted. The adjustment is
then made with the rotary knob.
8) CAUTION Indicator LED: During testing, the Red LED above the high volt-
age output will flash if a dangerous voltage is present.
9) High Voltage Output Plug: High voltage output terminal.
10) Power Button: Press to turn the tester ON and OFF.
11) START Button: Press to start a test.
12) LOCAL/RESET Button: Press to reset/stop a test, or switch from remote to local
mode.
13) MENU Button: When pressed, the "MENU" mode becomes active and you
can then select setup functions.
14) UTILITY Button: When pressed, the "UTILITY" mode is active and you can
view all the utility setup parameters.
15) EDIT/SAVE Button: When pressed, the "EDIT" mode is active and you can
edit the current step or setup. Pressing the EDIT/SAVE button again will save
this step or setup.
16) Rotary Knob: If the "EDIT" mode is active, turn the knob to increase or
decrease the value of the active parameter. If the "MENU" mode is active, turn
the knob to increase or decrease the active Step.
17) LCD Backlight Adjustment: Screwdriver adjustment for the LED backlight
(use a small, insulated screwdriver).
18) Buzzer Volume Adjustment: Screwdriver adjustment for the buzzer volume
(use a small, insulated screwdriver).
19) CONTINUITY Terminal: Continuity check output terminal.
20) RETURN Terminal: Test return (common) terminal.
21) Scanner Interface: D-sub 9-pin female connector for scanner box.
22) Remote Interface: The remote interface facilitates all of the functions via PLC
control.
23) RS-232 Terminal: D-sub 9-pin connector, Input/Output connector.
24) Fuse Holder with Voltage Selector: To change AC source voltage, pull the
fuse holder and rotate it to the proper value.
25) Ground Terminal: Connect ground terminal to the earth ground.
26) AC Plug: Accepts standard AC power line cords.
8
Hipot Electrical Safety Testers Models H111 and H216
Publicidad
