Publicidad
Idiomas disponibles
Idiomas disponibles
4.4
Synopsis of Commands
The tables in this section summarize the programmable Hipot Tester commands.
These tables divide the commands into three functional classifications:
• General Setting Commands
• Status Commands
• Miscellaneous Commands
The tables also provide a brief explanation of each command.
4.4.1 General Setting Commands
Table 1 lists the general setting commands that control and query the settings of
the Hipot Tester.
Table 1
Commands
:GROup <NR1>
:GROu?
:STEP <NR1>
:STEP?
:FUNCtion:TEST:MODe <NR1>
:FUNCtion:TEST:MODe?
:FUNCtion:TEST:STATe <NR1>
:FUNCtion:TEST:STATe?
:MEASure<x>?
:UTILity:AC:FREQuency <NR1>
:UTILity:AC:FREQuency?
:UTILity:ARC:CURRent <NR2>
:UTILity:ARC:CURRent?
:UTILity:ARC:MODe <NR1>
:UTILity:ARC:MODe?
:UTILity:TEST:MODe <NR1>
:UTILity:TEST:MODe?
:UTILity:IRTest:MODe <NR1>
:UTILity:IRTest:MODe?
:UTILity:GBZero:STATe?
:UTILity:GBZero:TEST
:ACContinue:VOLTage <NR2>
:ACContinue:VOLTage?
Hipot Electrical Safety Testers Models H111 and H216
Explanation
Set the value of group
Query the value of group
Set the value of step
Query the value of step
Set the value of test mode
Query the value of test mode
Set the value of test state
Query the value of test state
Query the value of measurement
Set the value of AC frequency
Query the value of AC frequency
Set the value of ARC current
Query the value of ARC current
Set the ARC test mode
Query the ARC test mode
Set the test mode from step 1 or form
present setup
Query the test mode
Set the value of IR test mode
Query the value of IR test mode
Query the GB zero check
Start the GB zero check
Set the CAC test voltage
Query the CAC test voltage
17
Publicidad
