Publicidad
Idiomas disponibles
Idiomas disponibles
The Drain cycle will start and the scrolling from right to
left of the luminous dots are displayed.
on the display; the end of the phase is confirmed by the
apearing of the message "OFF" on the display.
Maximum duration 1 min.
EN
By pressing the "S9" or CYCLE button you can
interrupt the drainage cycle before the preset time
is up.
2.1.h Reading the TEMPERATURES
It is possible to view the real and set temperatures in
sequence, by pressing the "S1" button. This function
is only possible with machine in stand-by.
- Pressing the "S1" button once, the message "t1" will
be displayed.
-Pressing the "S1" button a second time, the REAL
temperature of the water in the tank will be displayed;
- Pressing the "S1" button a third time, the PROGRAM-
MED temperature of the water in the tank (for the
selected cycle) will be displayed;
- Pressing the "S1" button a fourth time, the message
"t2" will be displayed, indicating the boiler;
- Pressing the "S1" button a fifth time, the REAL tempe-
rature of the water in the boiler will be displayed;
- Pressing the "S1" button a sixth time, the PROGRAM-
MED temperature of the water in the boiler (for the
selected cycle) will be displayed;
- Pressing the "S1" button a seventh time, the machine
will return to its initial status.
The operations listed above CANNOT BE CARRIED
OUT DURING A CYCLE.
18
ATTENTION
2.1.i Switching off the washer at the end of the day
At the end of the working day SWITCH OFF the washer
by pressing the "Q1" button.
Switch off the mains switch feeding the machine and
close the water supply taps.
For any repairs, contact only assistance centres
authorised by the manufacturer.
WARNINGS DURING OPERATION
1) Ensure that the washing temperature remains at
approx. 55-60°C;
2) Avoid immersing bare hands in the detergent-filled
water; if this should happen, rinse immediately and
thoroughly with running water;
3) Use only anti-foaming detergents, specifics for use
in industrial machines;
4) Deactivate the machine in case of break-down or
malfunction.
For any repairs, contact only assistance centres
authorised by the manufacturer, and insist on the
use of original parts.
5) When the machine is operating, do not open the
door too rapidly.
Failure to follow the above warnings may compro-
mise the safety of the washing machine.
Useful advice for better washing results
Any unsatisfactory results from washing can be seen
when traces of dirt are left on dishes or other items;
any water marks may be caused by insufficient rinsing.
In this case, ensure that the rinsing nozzles (27) are
clean.
If there are traces of waste, ensure that:
• the filters (22) (23) are clean;
• the water temperature is around 55-60°C;
• items are correctly positioned in the basket;
• the washing nozzles are clean (26);
• the wash arms (24) (25) rotate freely.
• check the concentration of the detergent and rinse
agent.
Publicidad
