Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION & PREPARATION
- 175 CCA
- Battery Box Size: 8 1/2" L x 6" W x 6 1/4" H (Battery can be slightly
taller and still be covered by lid.)
- Battery should have lifting strap for easy installation.
ENGINE/BURNER FUEL TANKS:
DANGER RISK OF FIRE! -DO NOT SMOKE WHILE FUELING! -DO
NOT FILL THE FUEL TANKS WHILE UNIT IS RUNNING OR
HOT. ALLOW UNIT TO COOL FOR TWO MINUTES BEFORE
REFUELING. -DO NOT FILL FUEL TANKS TO POINT OF
OVERFLOWING.
SPACE FOR FUEL EXPANSION.
1. Review "Risk of Explosion or Fire" warnings, before fueling.
WARNING RISK OF EXPLOSION OR FIRE! ALWAYS STORE FUEL
AWAY FROM THE WASHER WHILE THE UNIT IS RUNNING OR
HOT.
2. Locate the Safety Decals on your unit and heed their warnings.
3. Gasoline Engines: See Engine Owner's Manual for gasoline requirements.
Burner Fuel: When filling tank, use No. 1 or No 2 fuel oil/diesel or kerosene.
4. Check the engine oil level before starting the engine. (See Engine Manual.)
5. Refer to the Engine Manual supplied with this unit for proper engine
adjustment procedures.
6. Review the Engine Manual accompanying this pressure washer for correct
engine start-up and maintenance procedures.
DUAL LANCE ASSEMBLY WITH ADJUSTABLE PRESSURE:
WARNING RISK OF INJECTION CAUSING SEVERE INJURY! -THE
TRIGGER GUN SHOULD ALWAYS BE LOCKED IN THE OFF
POSITION WHEN NOT IN USE! -NEVER LOOK DIRECTLY AT THE
NOZZLE UNLESS IT IS DISCONNECTED FROM THE TRIGGER
GUN/DUAL LANCE ASSEMBLY!
This unit features a dual lance assembly with adjustable pressure which
allows the user to select a high or low pressure spray. Simply rotate the
adjustable grip on the dual lance to achieve the desired pressure selection.
1. Selection of high pressure can be achieved by turning the adjustable grip
on the Dual Lance assembly counterclockwise.
2. Selection of low pressure can be achieved by turning the adjustable grip
on the Dual Lance clockwise.
QUICK-CONNECT NOZZLES:
Various nozzles may be quick-connected into the end of the dual lance to
change the spray pattern. The detergent nozzle has been pre-installed at
the factory. When using quick-connects (Q.C.), be certain the connection
is securely locked as shown at right. If not, the high pressure water may
shoot the nozzle from the lance, causing severe injury or serious damage.
Operator's Manual
ALLOW APPROXIMATELY 1/4" OF TANK
11
Publicidad
