Muskoka 320-42C-10 Manual Del Usuario página 11

Operation
USING THE MANUAL AND REMOTE CONTROLS
The wall-mount fireplace can be operated with the multi–function IR remote control or from the touchscreen controls on the front glass of
the fireplace. Once the fireplace is turned on the digital display and the control icons on the front glass will illuminate. If no button or icon is
pressed within 10 seconds, the fireplace controls will deactivate by turning off the digital display first and then the icons. To reactivate the
controls press any button on the remote or touch any icon on the front glass.
1. Power ON/OFF
2. Flame Control
3. Heat Control
4. Timer Control
5. Ember Bed
6. Level Selection
7. Backlight Control
8. Digital Display
USING THE POWER BUTTON
□ The Power ON/OFF button turns the fireplace ON and
OFF. When the fireplace is OFF, pressing the Power
ON/OFF button on the remote control or touching the
icon on the front glass will turn ON the fireplace. If
the Power ON/OFF button is pressed again within 10
seconds it will turn OFF the fireplace. With inactive
controls, press twice to turn OFF the fireplace. The
first press on the Power ON/OFF button lights up the
touchscreen icons and activates the controls.
□ The fireplace has a built-in memory function. When
the fireplace is turned back on, the display will
show the last selected function and it will start at
the last used settings (except timer). If the fireplace
is disconnected from the main power source, it will
restart at the default settings.
LEVEL SELECTION BUTTON
□ The Level Selection button is used to adjust the heat setting, flame and
ember bed brightness, the speed of color rotation, and timer setting.
See relevant section for more details.
□ This button on fireplace has a backlight function. Touch and hold this
button for 5s, then enter into Backlight mode. Press multiple times to
cycle through the following options shown in the chart.
NOTE: This can only be done through the touchscreen controls.
6
5
3
7
BATTERY REPLACEMENT
1.
2.
3.
1
2
4
The battery compartment is located
on the back end of the remote
control.
□ Press and slide the battery cover
open.
□ Insert one 3V (CR2032) battery
(included) with the + side up into
the battery compartment.
□ Replace the battery cover.
NOTE: The battery should be removed if the product is to be left
unused for a long time.
Button Press Display Value
1st Press
2nd Press
3rd Press
4th Press
5th Press NONE
8
6
5
4
3
2
1
Backlight Color
F4 Yellow
F3 Blue
F2 Yellow & Blue
F1 Color Rotation
OFF
11