ABB DELTAsingle Manual De Instrucciones página 46

Time (Applies only to meters with internal clock)
Time is shown as hh:mm:ss. Push
push to step to hour wanted as hh. After hour setting
Sc
push to get to setting of minutes. Set minutes as mm.
S
Example: 30 minutes, Scroll to 3 and push
to 0. Push
seconds to zero. When all settings are done confirm by
pushing S
Primary addres
S
Push , first digit in the three-digit number is flashing.
Push to step. Push
Sc
Set digit two. Push
digit. When setting is completed confirm by pushing
To move to communication, push
Open / close communication
Communication can be open (OPEn) or closed (CloSED).
S
Push . Push
Confirm setting by pushing
Tariffs (Applies only to tariff meters)
Tariffs can only be set by using special software. The
default settings are:
2 tariffs.
4 tariffs.
Enter DST last Sunday in March (02:00-03:00)
Exit DST last Sunday in October (03:00-02:00)
S
to get to setting of seconds.
. To move to primary address push
S
to move between open and closed.
Sc
07:00 – 23:00 and 23:00 – 07:00
No default settings.
S
to move to the second digit.
to move to the third digit. Set third
S .
44
, hours flashing,
S
S
Sc
Sc
.
. Scroll
sets the
.
Sc
.
S