Publicidad
Before You Begin...
* Consult your local authorities for any permits required to construct pergola.
Prior to the construction of your pergola, check with the local building code official to review any required permits or building limitations.
* COMPLETE SITE PREPARATION AND FOUNDATION CONSTRUCTION BEFORE UNPACKING ALL PARTS.
A level and sturdy foundation is required before pergola construction can begin.
Consideration for measurements of foundations should be based on the following dimensions:
e 8'x 10' Pergola - measures 8' x 10' from outside of post to outside of post.
e 10' x 10' Pergola - measures 10' x 10' from outside of post to outside of post.
e 10' x 12' Pergola - measures 10' x 12' from outside of post to outside of post.
* Read instructions thoroughly prior to assembly.
This kit contains parts that can be damaged if assembled incorrectly or in the wrong sequence. Once assembled, the pergola cannot be
taken apart without breakage.
* Please follow instructions.
If you have questions or concerns with this product DO NOT return to store. Assembly questions? Missing parts? Call 1-800-846-2345
or 1-630-879-2050. Suncast is not responsible for replacing parts damaged due to incorrect assembly.
* Assistance is required.
Due to the size of the parts, at least two people are required to handle, fit and secure pergola components.
* Foundation mounting hardware varies with each application.
Read manual first and contact your local building supply retailer for recommendations for your application.
* Avoid scratching the finish.
For steps where parts are placed upside down, place parts on a smooth surface to avoid scratching finish. Flatten cardboard from carton
to create a smooth work surface.
* Pergola not intended for use in extreme weather conditions.
* Do not stand, sit, or hang items from pergola structure.
* Handle carefully in extreme temperatures.
* Repair or replace broken parts immediately. Call 1-800-846-2345 or 1-630-879-2050 for replacement parts.
e Suncast is not responsible for damage caused by weather or misuse.
* At regular intervals inspect your pergola to make sure that assembly integrity has been maintained.
* Periodically check that the location you have chosen to set your pergola is still level.
* Avoid excess heat from any auxiliary source.
* Any additional holes drilled into parts could cause unsafe conditions.
* Follow manufacturer safety instructions when using ladder.
* Do not anchor to paver bricks. Foundation must be a solid surface.
* Exercise caution using a lawn mower, edge trimmer or other yard equipment near pergola.
* Do not attempt to cover overhead structure.
TOOLS REQUIRED
Screw Gun or Drill with Screw Bit or Phillips Screwdriver
Ladder
Tape Measure
Hammer
Level
Square
Assistance is required during assembly.
M
Publicidad
