Descargar Imprimir esta página

Qilive Q.6603 Manual De Instrucciones página 10

Frigorífico de 2 puertas

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 45
4. INSTALLATION
EN
4.1. PLACEMENT
30cm
7.5cm
595mm
135°
998mm
Precautions before installation:
Before installation or adjustment of accessories, ensure that the refrigerator is
disconnected from power.
Precautions shall be taken to prevent fall of the handle from causing any personal
injury.
Before use, remove all packing materials, including
bottom cushions, foam pads and tapes inside the
refrigerator; tear off the protective film on the doors and
the refrigerator body.
Please leave the packaging materials and other
parts out of reach of children to prevent from risk of
suffocation.
Keep away from heat and avoid direct sunlight. Do not
place the freezer in moist or watery places to prevent
rust or reduction of insulating effect.
Do not spray or wash the refrigerator; do not put
the refrigerator in moist places easy to be splashed
with water so as not to affect the electrical insulation
properties of the refrigerator.
The refrigerator is placed in a well-ventilated indoor
place; the ground shall be flat, and sturdy (rotate left or
right to adjust the wheel for levelling if unstable).
The top space of the refrigerator shall be greater than
30cm, and the refrigerator should be placed against a
wall with a clearance of more than 10cm on each side
to facilitate heat dissipation. The back of the appliance
should be placed against a wall with a clearance of no
10cm
more than 7.5 cm. Be careful not to damage the power
cord when approaching the wall.
Spare enough space for convenient opening of the
doors and drawers.
This refrigerator needs to be installed independently
and cannot be used as a built-in. Otherwise, it will
cause problems such as failure to install into the
cabinet, the performance and life of the product are
reduced. And the manufacturer does not provide basic
product warranty.
10

Publicidad

loading