Qilive Q.6603 Manual De Instrucciones página 12

3. Remove middle hinge screws and the middle hinge, also remove the hole caps
EN
on the other side; then lift the refrigerator compartment door until it is completely
separated from the cabinet.
hole cap
4. Remove the lower hinge assembly from the lower right corner and remove the
hole cap and screw cap from the lower left corner; remove the hinge shaft and
leveling feet and then install them on the opposite side of the lower hinge. Then
install the lower hinge assembly onto the lower left corner with fitting screws, and
install the hole cap and screw cap onto the lower right corner.
5. Remove the stoppers and sleeve pipes from both the refrigerator and freezer
doors, then install them on the opposite side of both doors;
On the upper end cap of the refrigerator door, exchange the installation position of
sleeve pipe and hole cap;
Remove the left decorative cover of the freezer door and move the sleeve pipe
from right side to left side.
6. Install the refrigerator compartment door onto the lower hinge and then attach the
middle hinge, screws and caps.
screw
hole cap
sleeve pipe
shaft
screw
screw cap
hole cap
decorative cover
sleeve pipe
12
middle hinge
screw
shaft
sleeve pipe
stopper
screw