Publicidad
Idiomas disponibles
Idiomas disponibles
Ranger™ 2000 Series
1. INTRODUCTION
This manual contains installation, operation and maintenance instructions for the
Ranger™ 2000 Series. Please read the manual completely before using the scale.
1.1 Safety Precautions
Please follow these safety precautions:
Verify that the AC input voltage printed on the data label matches the local AC
power supply.
Do not drop loads on the platform.
Make sure that the power cord does not pose a potential obstacle or tripping
hazard.
Use only approved accessories and peripherals.
Operate the scale only under ambient conditions specified in these
instructions.
Disconnect the scale from the power supply when cleaning.
Do not operate the scale in hazardous or unstable environments.
Do not immerse the scale in water or other liquids.
Do not place the scale upside down on the platform.
Only use weights within the scale's capacity as specified in these instructions.
Service should be performed only by authorized personnel.
2. INSTALLATION
2.1 Package Contents
Scale
Pan
2.2 Installing Components
Install the pan as shown below. Press to lock the pan into place.
Power Cord
Instruction Manual
Figure 2-1. Installing the pan
EN-1
Warranty Card
Publicidad
