Publicidad
Idiomas disponibles
Idiomas disponibles
TAPE
Continuous Playback From Tape Deck 2 to
Tape Deck 1
1
Press
TAPE
to select TAPE mode.
2 Load the tapes in
tape deck 1
and
2.
3
Press
PLAY
► on
tape deck 2.
4
Press
PAUSE
on
tape deck 1.
5
Press
PLAY
► on
tape deck 1
— Playback will begin with tape deck 2 and will
continue with tape deck 1 when playback on tape
deck 2 ends.
6 Press
STOP»OPEN
if you want to stop playback before
the end of the tape in
tape deck 1
or
tape deck 2.
-
During rewinding or fast forwarding of a tape, it is also
possible to select another source mode (e.g. CD, TUNED
or AUX mode).
- Check and tighten slack tape before use with a pencil.
Slack tape may get jammed or may burst in the
mechanism.
- C-120 tape is extremely thin and is easily deformed or
damaged. It is not recommended for use in this system.
- Store the tapes at room temperature and do not put
them too close to a magnetic field (for example, a
transformer, TV or loudspeaker boxes).
Selecting External Equipment
If you have connected the audio out terminals of the
external equipment (TV, VCR, Laser Disc or DVD player) to
the AUX IN terminals, you can hear the enhanced sound
from the system.
• Press
AUX
to select the external mode.
— "flU"" will be displayed.
Note:
- All the sound control features (e.g. DSC, DBB, etc.) are
available for selection.
21
Publicidad
