Publicidad
Idiomas disponibles
Idiomas disponibles
nivitK
• At the preset time, the TIMER will be activated.
— The selected source will be played.
The TIMER flag disappears from the display.
Notes:
-
During timer setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
- If the source selected is TUNER, the last tuned
frequency will be switched on.
- If the source selected is CD, playback will begin with
the first track of the last selected disc. If the CD trays
are empty, the TUNER will be selected instead.
To cancel the TIMER
1 Press
CLOCK*TIMER
for more than 2 seconds.
2 Press II to cancel the timer.
-* TRfJCL'L" will be displayed.
— The TIMER flag disappears from the display.
To start the TIMER again
(for the same time)
1 Press
CLOCK*TIMER
for more than 2 seconds.
2
Press
CLOCK*TIMER
again to store the start time and
the selected source.
MAINTENANCE
Maintenance
Cleaning the Cabinet
• Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution containing
alcohol, spirits, ammonia or abrasives.
Cleaning Discs
• When a disc becomes dirty, clean it
with a cleaning cloth. Wipe the disc
from the center out.
• Do not use solvents such as benzine,
thinner, commercially available
cleaners, or antistatic spray intended
for analog records.
Cleaning the CD lens
• After prolonged usage, dirt or dust may accumulate at
the CD lens. To ensure good playback quality, clean the
CD lens with Philips Magnavox CD Lens Cleaner or any
commercially available. Follow the instructions supplied
with the Lens Cleaner.
Cleaning the Heads and the Tape Paths
• To ensure good recording and playback quality, clean the
heads, the capstan(s), and pressure roller(s) after every
50 hours of tape operation.
• Use a cotton swab slightly moistened with cleaning
fluid or alcohol.
• You can also clean the heads by playing a cleaning tape
through once.
Demagnetizing the heads
• Use a demagnetizing tape available at your dealer.
25
Publicidad
