RECORDING
Notes:
- For recording, use only tape of IEC type I (normal tape).
- The tape is secured at both ends with leader tape. At
the beginning and end of tape, nothing will be recorded
for six to seven seconds.
- The recording level is set automatically, regardless of
the position of Volume or DBB.
- To prevent accidental recording, break out the tab on the
left shoulder of the tape side you want to protect.
One Touch Recording
• For One Touch Recording, as soon as you press RECORD,
the current source will be recorded on tape deck 1.
1 Load a blank tape in tape deck 1.
2
Press
RECORD
on tape deck 1 to start recording.
— The REC flag starts flashing.
3
Press
PAUSE
to interrupt recording.
4
Press
STOP*OPEN
on tape deck 1 to stop recording.
22