Publicidad
Idiomas disponibles
Idiomas disponibles
Dubbing tapes
(from tape deck 2 to tape deck 1)
1 Load the prerecorded tape into tape deck 2 and a blank
tape into tape deck 1.
— Make sure that both tapes have their full spool to the
left.
2
Press
DUBBING
to switch between normal and high
speed dubbing.
— "fJDfPflR." (normal speed) or TR5I" (high speed)
will be displayed.
— HSD flag appears on the display for high speed
dubbing.
3
Press
PAUSE
on tape deck 1.
4
Press
RECORD
on tape deck 1.
5
Press
PLAY
on tape deck 2.
— Recording will start automatically.
— The REC flag starts flashing.
6
Press
STOP»OPEN
on tape deck 1 and tape deck 2 to
stop dubbing.
Notes:
- At the end of side A, flip the tapes to side B and repeat
the procedure.
- Dubbing of tapes is only possible from tape deck 2 to
tape deck 1.
- To ensure good dubbing, use tapes of the same length.
-
During high speed dubbing in Tape mode, the sound is
reduced to a low volume.
CD Synchro Start Recording
During CD synchro start recording,
• It is not advisable to fast forward/rewind your tape in
tape deck 2.
• It is not possible to listen to another source.
1 Load a blank tape into tape deck 1 and a disc into the
disc tray.
2
Press
CD.
• You can program the tracks in the order you want them
to be recorded (see Programming Tracks). If not, the
tracks are recorded according to the selected disc.
3
Press
RECORD
on tape deck 1 to start recording.
4
Press
STOP»OPEN
on tape deck 1 to stop recording
and
STOP'CLEAR
■ to stop CD playback.
Recording from other sources
(only on tape
deck 11
1 Load a blank tape into tape deck 1.
2
Press
CD, TUNER, TAPE
or
AUX
• Start playback of the selected source.
3
Press
RECORD
on tape deck 1 to start recording.
— The REC flag is flashing.
4
Press
PAUSE
to interrupt recording.
5
Press
STOP*OPEN
on tape deck 1 to stop recording.
Note:
- During recording, it is not possible to listen to another
sound source.
Publicidad
