Cleco mPro300GCD-STO Serie Descripción Del Hardware página 9

1 EN
1 About this Document
This document is intended for qualified employees respon-
sible for installation and maintenance (installer, mainte-
nance technician, service, operator).
It contains information
for safe and appropriate handling of the product.
•
on function.
•
to technical data and maintenance.
•
The original language of this document is German.
Programming instructions are not included. See separate
programming instructions for this.
1.1 Software Request
Order No. Description
S168300 Controller software
S168677 mPro-Remote Interface: external com-
puter – controller
Other Documents
Number Document
P1730PM Programming Manual – Tightening Se-
quences
P2279SB System Handbook – NeoTek
P2461JH Installation Instruction – mPro300GCD-
(...)
P2468TS Troubleshooting – mPro300GCD
P2486PM Programming Manual – S168300
mPro300GCD
P2577SB System Manual – BD Series
P3364C EU Declaration of Conformity –
mPro300GCD-STO
Symbols in the Text
Menu options (e.g., Diagnostics) input fields,
italic
check boxes, radio buttons or dropdown menus.
> Indicates selection of a menu option from a
menu, e.g., File > Print.
<...> Specifies switches, pushbuttons or the keys of
an external keyboard, e.g., <F5>.
Courier Indicates Filenames and paths, e.g.,
setup.exe.
Indicates lists, level 1.
•
- Indicates lists, level 2.
a) Indicates options.
b)
Indicates results.

1. (...) Indicates action steps.
2. (...)
Apex Tool Group
► Indicates single action steps.
Sales & ClecoSales & Service Center, see last page.
Service
Center
2 Safety
► Read all safety warnings and instructions. Failure to
follow the directions and safety instructions could re-
sult in an electric shocks, burns and/or serious inju-
ries.
► Keep this document in a safe place for future refer-
ence!
► These safety instructions must be accessible at all
times to all persons who use the product.
2.1 Warnings and Notices
Warning notes are identified by a signal word and a
pictogram:
The signal word describes the severity and probability
•
of the impending danger.
The pictogram describes the type of danger.
•
General instructions include application tips and
useful information, but no warnings against haz-
ards.
Structure Of Warnings
P2552HW | REV D l 2023-12
Danger
A symbol combined with the word Danger in-
dicates a hazard with a high level of risk
which, if not avoided, will result in death or
serious injury.
Warning
A symbol combined with the word Warning
indicates a hazard with a medium level of
risk which, if not avoided, could result in
death or serious injury.
Caution
A symbol combined with the word Caution in-
dicates a hazard with a low level of risk
which, if not avoided, could result in minor or
moderate injury.
Note
A symbol combined with the word Note indi-
cates a potentially harmful situation which, if
not avoided, could result in damage to prop-
erty or the environment.
Caution
Type and source of danger.
Possible consequences of non-observance.
► Measures to avoid danger.
1
EN
9