MSA GasGard XL Instrucciones Para El Usuario página 22

5 Configuration
3. Use control push buttons to select required parameter.
Right button [ 8 ]
Up Button [ h ]
Left button [ ESC ]
Down button [ i ]
4. Press [ENTER] to confirm the selected parameter.
5. Use the control push buttons to change parameter value.
6. Press [ENTER] to accept the changes.
NOTE: Pressing [ESCAPE] toggles to the upper menu.
If FlameGard is selected from the sensor list, the Setting menu changes to the following single screen:
7. Use control push buttons to:
Accept changes and leave menu
Do not accept changes and leave menu
Return to the System menu.
5.2 Relay Setting Menu
The Relay Setting menu enables the user to configure each relay in relation to each channel.
5.2.1 Description of Relay Parameters
1. Enter into System menu.
2. In the System menu, select the item for "Relay Setting Menu" and press [ENTER] to confirm (see 5.1 S
23 GasGard XL
ystem Menu).
US