MSA GasGard XL Instrucciones Para El Usuario página 26

5 Configuration
1. Enter the System menu.
2. In the System menu, select the item for "General Setting Menu" and press [ENTER] to confirm (see5.1 S ystem
Menu).
Right button [ 8 ]
Up Button [ h ]
Left button [ ESC ]
Down button [ i ]
The first of three configuration screens displays.
NOTE: Use [UP/DOWN] to toggle between the three screens:
1 Language:
2 System Psw:
3 Battery Back Up:
4 Calibration Psw:
5 RESET Psw:
NOTE: Setting any above password to 0 disables this password.
1 Modbus RTU:
2 Modbus TCP/IP
27
Setting required language
Setting system password (factory preset password is: 123)
Select if battery backup is used
Setting calibration password (factory preset password is: 321)
Setting alarm reset password (factory preset password is: 0)
Defines the RS 485 / USB communication parameters
• ADR – unit address
• Speed – communication speed
• Parity – setting the parity (Even/Odd)
Defines the Ethernet communications parameters
GasGard XL US