Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT OPERATION
Expert Mode Operations Level 2
Expert Mode Operations Level 2 allows for
customizing and changing the cycle times
for Rear Wash, Front Wash, Strong Wash,
Warm Air Dryer, Gentle Wash, and Gentle
Wash Dry Cycle.
Custom programming must be performed in
1. Enter Expert
Mode Level 2
1. Press/hold STOP
& Nozzle Cleaning
for 2 seconds.
2. Nozzle Cleaning
LED starts blinking
to indicate Special
Mode has been
entered.
3. Turn OFF seat
sensor - place
hand on right area
of seat.
4. Blue circle LED
light on remote
turns OFF = Seat
Sensor OFF.
24
2. Changing Cycle Times
Rear Wash
(default 2 min)
1. Press/hold Rear
& Water Temp
together.
2. Water Temp light
blinks.
3. Continue to
press Rearwithout
releasing.
4. Press Water Temp
to select new
cycle time with
LED light.
OFF=1 min
Green=2 min
Yellow=3 min
Red=5 min
5. Release to set
new time.
Expert Mode status with the seat sensor
overridden and turned off, and with the seat
unoccupied. Using the remote, follow steps
1-3 to enter, program, and exit Expert Mode
Level 2.
Front Wash
(default 2 min)
1. Press/hold Front &
Water Temp together.
2. Water Temp light
blinks.
3. Continue to press
Front without
releasing.
4. Press Water Temp to
select new cycle time
with LED light.
OFF=1 min
Green=2 min
Yellow=3 min
Red=5 min
5. Release to set
new time.
Strong Wash
(default 2 min)
1. Press/hold Strong &
Water Temp together.
2. Water Temp light
blinks.
3. Continue to press
Strong without
releasing.
4. Press Water Temp to
select new cycle time
with LED light.
OFF=1 min
Green=2 min
Yellow=3 min
Red=5 min
5. Release to set
new time.
Publicidad
