LaserLiner Quadrum Compact Manual Del Usuario página 23

Slope function up to 4° – horizontal
This function deactivates the automatic sensor. To use the function, press the
auto/man button. The plus/minus buttons are used to re-adjust the slope by
means of a motor. In the process the X-and Y-axis can be adjust separately.
Refer to the illustrations below.
Slope function up to 4° – vertical
!
When the 4° maximum slope range has been reached, the laser will
stay fixed and blink. In this case, reduce the slope angle.
Quadrum Compact / Compact Green
man
man
± 5°
X
Y X
Y
23
EN