Publicidad
Idiomas disponibles
Idiomas disponibles
Slope function > 4°
Steeper slopes can be set using the angle plate,
which is available as an optional extra (product
ref. 080.75). TIP: Allow the device to align itself
automatically and set the angle plate to the zero
position. Then press the auto/man button to switch
the automatic sensor off. Finally, incline the device
to the angle you require.
!
auto/man function LED ON: Manual alignment
Laser modes
Rotary mode
The following speeds can be set using the rotary
button: 0, 300, 600 rpm
Spot mode
You access spot mode by pressing the rotary
button repeatedly until the laser stops rotating.
The laser can then be rotated to the required
position using the positioning buttons.
Scan mode
The scan button can be used to activate and
set a lightintensive segment in 4 different
widths. You position the segment via the
direction buttons.
24
EN
man
Publicidad
