LaserLiner Quadrum Compact Manual Del Usuario página 25

Hand receiver mode
Working with the laser receiver (available as an
optional extra): Set the rotary laser to maximum
speed and switch on the laser receiver. Refer to
the operating instructions for the respective laser
receiver about this.
Working with the reference laser
The device has one reference laser. In vertical
mode the reference laser is used to align the
device. Align the reference laser parallel to the
wall for this purpose. This aligns the vertical laser
plane at a right angle to the wall, see illustration.
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents,
scouring agents and solvents. Remove the battery before storing for longer
periods. Store the device in a clean and dry place.
Calibration
The measuring device should be calibrated and tested on a regular basis
to ensure it is accurate and working properly. We recommend the measuring
device is calibrated every year. If necessary, contact your distributor
or the UMAREX-LASERLINER service department.
Quadrum Compact / Compact Green
25
EN