A.
Insert mortise lock
Risk of cable crushing with mortise lock with
emergency opening logging!
1.
Insert mortise lock.
Fig. 9
correct
Fig. 11
2.
Screw in the mortise lock.
With mortise lock with emergency opening logging, the mortise lock
connecting cable must be fixed in position as shown in fig. 11.
3.
Check position of mortise lock using a locking cylinder. The locking cyl-
inder must be easy to insert. If necessary, increase size of mortise
or clear the locking cylinder access route.
Dialock Door Terminals DTSH, DTSH FH - Status: 07.2008 - 732.29.134
incorrect
Fig. 10
cable
Fig. 12
Installation Instructions
cable
Hooded
screw
47