Create Wind Flowood Manual De Instrucciones página 9

1. Speed control
2. ** Light control button
3. Turn off Botton
4. Power indicator
5. Timer
6. Battery for remote control
** Function only for the option with light
Warnings
1. Please use this product under the correct tension. Too low voltage will result in failed op-
eration.
2. Remove the batteries from the remote control if you are not going to use it for a long time.
Note: For safety reasons and to ensure optimal operation, connect the ground wire correctly.
3. When installing the fan, make sure that nothing presses on the receiver antenna or other
cables to prevent a short circuit.
ISSUES: When the remote control does not work, check whether:
• The fan has power.
• The fan is connected correctly.
• The battery in the remote control is charged.
• There are other remote controlled products nearby and in operation. Remote controlled
products with the same frequency that are operating in proximity will interfere with each
other.
INSTALLATION PREPARATION
76 cm
2.3 m
• To avoid personal injury and injury, ensure that the fan is hung in a location that allows
the blades to be 2.3 m or more from the floor and 76 cm from the nearest wall or obstacle.
• Make sure the mounting bracket is adequately secured to the building structure and can
support the full weight of the fan.
REMOTE CONTROL
INSTALLATION INSTRUCTIONS
76 cm
1
2
3
4
5
76 cm
2.3 m
6
76 cm
E NGLI SH
9