Midea MDRT489MTE Serie Manual De Usuario página 17

Temperature setting
• Each time the temperature setting button (A) is pressed, the temperature
setting changes once. When the temperature setting is finished, the fridge will
run according to the setting after 15 seconds.
• The setting changes in this order:
EN
Lock/Unlock
• Long pressthe TEMP key for 3 seconds to unlock and 30 seconds to
automatically lockwithout operation.
Damper adjusting slider
• The temperature inside the freezer can be adjusted by changing the position
of the damper slider.The initial position of the damper slider is at position A.If
lower temperature inside the freezer is required, you can adjust the damper
slider from the position A to left side.
• For better use of the refrigerator , it is recommended to keep the damper slider
at initial position.
Max setting position
Stop using
• Power failure: In case of power failure, even if it is in summer, foods inside the
appliance can be kept for several hours; during the power failure, the times of
door opening shall be reduced, and no more fresh food shall be put into the
appliance.
• Long-time nonuse: The appliance shall be unplugged and then cleaned; then
the doors are left open to prevent odor.
setting 1 setting 2
CO LDEST
setting 3
CO
12
setting 4
Damper Slide r
A