Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Tools you will need
8mm socket wrench
Thin-blade screwdriver
NOTE: Before you start lay the refrigerator on its back in order to gain access to
the base, you should rest it on soft foam packaging or similar material to avoid
damaging the backboard of the refrigerator.
Reversing the door
The side at which the door opens can be changed, from the right side (as supplied) to the left
side, if the installation site requires.
Warning!
When reversing the door, the appliance must not be connected to the mains. Ensure
that the plug is removed from the mains socket.
1.
Stand the refrigerator upright. Open the upper door to take out all door racks (to avoid
rack sdamaged) and then close the door.
Cross-shaped screwdriver
Monkey wrench
Door racks
8
EN
8mm wrench
Publicidad
