Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
3. Hold the LED cover with one hand and pull it with the other
hand while pressing the connector latch.
4. Replace LED light and snap it correctly in place.
5. Install the light cover.
Helpful hints and tips
Energy saving tips
We recommend that you follow the tips below to save energy.
•
Try to avoid keeping the door open for long periods in order to conserve energy. Ensure the
appliance is away from any sources of heat (Direct sunlight, electric oven or cooker etc).
•
Don't set the temperature colder than necessary.
•
Don't store warm food or evaporating liquid in the appliance.
•
Place the appliance in a well ventilated, humidity free, room. Please refer to Installing
your new appliance chapter.
•
If the diagram shows the correct combination for the drawers, crisper and shelves, do not
adjust the combination as this is designed to be the most energy efficient configuration.
Hints for fresh food refrigeration
•
Do not place hot food directly into the refrigerator or freezer, the internal temperature will
increase resulting in the compressor having to work harder and will consume more energy.
•
Do cover or wrap the food, particularly if it has a strong flavor.
•
Place food properly so that air can circulate freely around it.
Hints for refrigeration
•
Meat (All Types) Wrap in polythene food: wrap and place on the glass shelf above the
vegetable drawer. Always follow food storage times and use by dates suggested by
manufacturers.
•
Cooked food, cold dishes, etc.:
They should be covered and may be placed on any shelf.
•
Fruit and vegetables:
They should be stored in the special drawer provided.
•
Butter and cheese:
Should be wrapped in airtight foil or plastic film wrap.
•
Milk bottles:
Should have a lid and be stored in the door racks.
20
EN
Publicidad
