Masterbuilt GRAVITY XT Serie Manual Del Usuario página 24

Operating Instructions
CONTROL PANEL
Power ON/Off/Pause Controller:
1. Press button to power controller ON.
2. Single press while on = PAUSE FUNCTION
3. Long press while on = Power OFF
Pause Function:
The grill is equipped with a PAUSE function to better help maintain set temperatures when the lid is opened.
• When cooking at temperatures over 500
opening your grill lid.
• The pause function will stop the fan to ensure there is not a spike in temperature when opening the lid.
• To engage the PAUSE function, press the power button (the controller will display HOLD).
• To resume to normal temperature maintenance and to reactivate the fan, press the power button again.
Screen Cycle:
Press button to view graph or cycle through different controller views.
Screen Saver Mode:
Press and hold the screen cycle button to activate screen saver mode. In screen saver mode all
set temperatures and timers remain active. To exit screen saver mode, press any button. Screen saver mode
will also be deactivated if: a meat probe has reached the set temperature, a previously set timer has been
reached, or an error message is triggered.
Set Temperature:
1. Press button.
2. Turn knob to desired temperature.
3. Press button again to set temperature
(Temperature will automatically set after 3 seconds.)
Set Time:
• Countdown Timer
1. Press button.
2. Turn knob to desired hours.
3. Press button to set hours.
4. Turn knob to desired minutes.
5. Press button to set minutes. The timer will start.
6. Press button to pause and resume timer.
7. Press and hold button to reset timer.
Set Meat Probe Temperatures:
1. Plug in meat probe
2. Press screen cycle button until meat probe is displayed on screen
3. While meat probe is displayed on screen, press set temp button to set meat probe target
4. Scroll knob until desired temperature is displayed
5. Press set temp button to confirm temperature
(If meat probe reaches 300F (149C), an alarm will sound. Remove the meat probe from the heat and allow it to cool.)
24
(260 ) ensure the PAUSE function is enabled BEFORE
°F °C
Set Temperature From Fº to Cº :
1. With power off, hold set temp
button
2. Press power button
• Count Up Timer
1. Press and hold button.
2. Timer will begin counting up from 00:00.
Timer will count by Minutes:Seconds and
then Hours:Minutes.
3. Press button to pause and resume timer.
4. Press and hold button to reset timer.
Meat Probe Jacks
3. Unit powers up with "F" or
"C" flashing on display
4. Use knob to select temp unit
5. Press set temp to confirm