Suncast BMS2500 Instrucciones De Armado página 3

A
Before You Begin...
• Consult your local authorities for any permits required to construct shed.
Prior to the construction of your shed, check with the local building code official to review any required
permits or building limitations.
• A level and sturdy foundation is recommended before shed construction can begin.
Review the site preparation information within the manual before beginning assembly.
• Read instructions thoroughly prior to assembly.
This kit contains parts that can be damaged if assembled incorrectly or in the wrong sequence.
• Please follow instructions.
Suncast is not responsible for replacing parts lost or damaged due to incorrect assembly.
• Check for all parts before you begin assembly.
Using the parts page(s) provided within this manual, verify all parts are present. COMPLETE SITE
PREPARATION AND FOUNDATION CONSTRUCTION BEFORE UNPACKING ALL PARTS.
• Assistance is required during entire assembly.
A
Caution
• Proper site preparation required.
• Shed not intended for storage of flammable, caustic or corrosive materials.
• Shed not intended for habitation or for use by children.
• DO NOT stand, sit, or store items on storage shed roof.
• Repair or replace broken parts immediately.
• DO NOT place near objects that are hot or can become hot.
• Heavy articles should not be leaned agains the walls, as this may cause panel distortion
and permanent damage.
• Suncast is not responsible for damage caused by weather or misuse.
• This kit contains parts with metal edges. Please be careful when handling, use of work
gloves is recommended.
• DO NOT place in areas near highly reflective surfaces. (Note: Low- E windows are more
reflective than standard windows and may affect the longevity of the product.)
• Product is water resistant and not waterproof. Locate unit away from gutter and down
spouts for optimal performance.
3