Publicidad
Idiomas disponibles
Idiomas disponibles
TOP PANEL
1
3
3 4 5 5
6
7 8 8 8
9
10
11
12
13
15
18 19
19 19 19 19
20
21
13
STRIP SEARCH – The length of this strip represents the length of the entire track. Hold Shift and place
1.
your finger on a point along this sensor to jump to that point in the track. (If you want to scroll through a
track, we recommend using your computer rather than running your finger along the strip.)
TAP – Pressing this button in time with the beat will help determine the BPM of the track.
2.
LOOP LENGTH – Halves or doubles the length of your Auto Loops or currently selected loop.
3.
BEATJUMP – Changes the function of the Loop Shift buttons to Beatjump.
4.
LOOP SHIFT – Adjusts the Loop Out point (when not in Beatjump Mode). When in Beatjump Mode,
5.
pressing a Loop Shift button will cause the track to jump ahead or back by a beat.
IN – This button sets the beginning point of a loop.
6.
OUT – This button sets the ending point of a loop. When outside of a loop, press this button to jump
7.
back to your last selected loop. Press Shift + Out to set a 2-beat Auto Loop.
AUTO – These buttons set Auto Loops.
8.
•
Press Auto 1 to set a 1-beat Auto Loop. Press Shift + Auto 1 to set a 16-beat Auto Loop.
•
Press Auto 4 to set a 4-beat Auto Loop. Press Shift + Auto 4 to set a 32-beat Auto Loop.
•
Press Auto to set an Auto Loop of whatever length is currently selected in Traktor. Press Shift +
Auto to set an 8-beat Auto Loop.
ASSIGN – User-assignable MIDI buttons. You can assign functions to these buttons in the software.
9.
SCRATCH – Turns Scratch Mode on or off. If Scratch Mode is on, the jog wheel will scratch like a
10.
turntable when you move it.
SET MASTER – Allows the selected deck to determine the Master Tempo. Pressing a deck's Sync
11.
button will match its tempo to the Master Tempo.
RANGE – Changes the range of pitch bend.
12.
PITCH SLIDER – This controls the speed of the music. Moving towards the "+" will speed the music up,
13.
while moving towards the "–" will slow it down.
PITCH BEND – Allows you to briefly adjust the speed of the music faster or slower for as long as the
14.
button is held. Useful for beat-matching two songs that might be at the same tempo but whose beats
are not quite aligned.
JOG WHEEL –
15.
•
During playback with Scratch Mode off, moving the wheel will pitch-bend the Deck.
•
During playback with Scratch Mode on, moving the wheel will "scratch" the music. (You can also
touch just the outer edge of the wheel and move it to pitch-bend the Deck.)
•
While paused, moving the wheel will let you "scrub" through the track's audio.
LAYER – Selects which Layer in the software is controlled by that hardware Deck.
16.
TRACK RESET – Returns the track to its start point.
17.
2
40
35
34
41
9
9
42
24
16
25
26
27
29
30
17
32
22
23
46
36
36
43
44 45
37 38 39
9
9 9
42
42
42
24
24
24
25
25
25
28
26
26
26
27
27
27
29
31
29
31
29
30
32
32
32
33
5
2
34
35
3
3 4 5 5
9
9
6
7 8 8 8
16
15
17
18 19 19 19 19 19
23
20
21
22
1
9
10
11
12
13
13
Publicidad
