Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TOP PANEL FEATURES
1
2
33
29
24
25
25
26
27
27
1.
EJECT – Press this button to open or close the CD disc tray.
2.
JOG WHEEL – The jog wheel functions differently depending on its current mode.
a) If a track is not playing, the JOG WHEEL will search slowly through a track's frames. To set a
new cue point, rotate the JOG WHEEL then begin playback when you have determined the
proper position. Press CUE to return to that cue point.
b) If a track is playing, the JOG WHEEL will temporarily bend the pitch of the track. Rotating the
JOG WHEEL clockwise temporarily speeds it up while rotating it counterclockwise slows it down.
This is useful for beat-matching.
c) When the SEARCH button has been activated, rotating the JOG WHEEL will move rapidly
through the track.
d) When the SCRATCH button has been activated, rotating the JOG WHEEL will "scratch" over the
audio of the track, like a needle on a record.
Note: The JOG WHEEL is not touch-sensitive.
3.
SCRATCH – Activates or deactivates Scratch Mode. While activated, rotating the JOG WHEEL creates
a 'scratch' effect. The LED indicator will be blue when Scratch Mode is active.
(Note: This feature is not optimal for searching through long audio passages. For longer searches,
activate the SEARCH function.)
4.
SEARCH – Activates or deactivates Search Mode. Press
this button to use the JOG WHEEL to rapidly scan through
the track. The LED indicator will be red when Search
Mode is active.
5.
CUE – During playback, press CUE to return to the cue point and pause the track. Hold down CUE to
start playback from the cue point, and release CUE to return to that point and pause the track. If the
track is paused, use the JOG WHEEL to locate a new cue point.
6.
PLAY / PAUSE – Plays or pauses the track.
Note: When paused, pressing PLAY will only set a new cue point if the JOG WHEEL has been moved.
7.
TRACK SELECT – Selects the track to be played. Press and hold either of the TRACK SELECT
buttons to rapidly change tracks.
8.
FOLDER – Press this button to enter Folder Mode. The folder name will be displayed on the LCD.
Here, you can press and hold the FOLDER button and use the TRACK SELECT buttons to select a
folder. Release FOLDER to enter the selected folder. (When inside a folder, use the TRACK SELECT
buttons to select the track.) Press FOLDER again to exit Folder Mode.
9.
+10 – Press this button to skip through the CD track listing 10 tracks at a time.
10.
LOOP IN – Sets a new cue point or the start point of a loop (a "Loop In" point) during playback.
11.
LOOP OUT – Sets the end point of a loop (a "Loop Out" point) and starts playing the loop. While
playing a loop, press LOOP OUT to release it from the loop and continue normal playback.
12.
RELOOP – Plays the track immediately from the beginning of a loop (and reactivates the loop).
13.
PITCH – Activates or deactivates the PITCH FADER. Press to cycle through the available pitch ranges
(±4%, 8%, and 16%). The current range will be indicated on the LCD and by pitch percentage LED
indicators.
7 7
22
8
9
19
20
21
17
3
4
16
13
14
10
11
12
5
6
15
23
29
23
24
25
24
26
28
28
27
1
22
18
40
2
41
29
23
36
24
25
26
35
28
27
34
To create a cue point, move the JOG WHEEL
when the track is paused. The cue point will
be set once you start playback from that point
(by pressing PLAY / PAUSE).
3
7 7
8
9
17
19 20
21
16
13
3
4
14
10
11
12
6
5
15
39
30
38
31
37
32
Publicidad
Tabla de contenido
