Descargar Imprimir esta página

DeWalt DCLE14201G Manual De Instrucciones página 11

Láser de línea cruzada verde, láser de línea cruzada roja

Publicidad

Idiomas disponibles

Idiomas disponibles

Do not position the laser level near a reflective
surface which may reflect the laser beam toward
anyone's eyes. Serious eye injury could result.
Turn the laser level off when it is not in use. Leaving
the laser level on increases the risk of staring into the
laser beam.
Do not modify the laser level in any way. Modifying the
laser level may result in hazardous laser radiation exposure.
Do not operate the laser level around children or
allow children to operate the laser level. Serious eye
injury may result.
Do not remove or deface warning labels. If labels are
removed, the user or others may inadvertently expose
themselves to radiation.
Position the laser level securely on a level surface.
If the laser level falls, damage to the laser level or serious
injury could result.
Personal Safety
Stay alert, watch what you are doing, and use common
sense when operating the laser level. Do not use the
laser level when you are tired or under the influence of
drugs, alcohol, or medication. A moment of inattention
while operating the laser level may result in serious
personal injury.
Use personal protective equipment. Always wear eye
protection. Depending on the work conditions, wearing
protective equipment such as a dust mask, non‑skid
safety shoes, hard hat, and hearing protection will reduce
personal injury.
Laser Level Use and Care
Do not use the laser level if the pendulum lock/unlock
and power switch do not turn the laser level on or off. Any
laser level that cannot be controlled with the switch is
dangerous and must be repaired.
Follow instructions in the Maintenance section of this
manual. Use of unauthorized parts or failure to follow
Maintenance instructions may create a risk of electric
shock or injury.
Important Safety Instructions for All
Integral Battery Charging

WARNING: Read all safety warnings, instructions,
and cautionary markings for the battery, USB
cable and product. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.

WARNING: Use the recommended power adapter
PD045E-C1C0AVU (5-20V, <=3.0A). If your laser
level was not sold with this charger, use a certified
power adapter that is compliant with applicable
country regulations and international/regional
safety standards with an output of 5-20V, 3A. The
power adapter MUST be a Class 2 power supply.
Using adapters that do not meet applicable safety
standards could result in injury.
Charge this laser every month if not in constant
use, and after each use when used often to ensure
battery longevity.
The provided USB cable is not intended for any uses
other than charging D
USB-C ports. Charging other types of tools may cause
their batteries to overheat and burst, resulting in
personal injury, property damage, fire, electric shock
or electrocution.
DO NOT expose USB cable to water, rain or snow.
Pull by the plugs rather than the cord when
disconnecting the USB cable. This will reduce the risk of
damage to the plugs and cord.
Make sure that the cord is located so that it will not
be stepped on, tripped over or otherwise subjected to
damage or stress.
DO NOT use a USB cable with a damaged cord
or plugs. Have them replaced immediately.
Foreign materials of a conductive nature, such as, but
not limited to, grinding dust, metal chips, steel wool,
aluminum foil or any buildup of metallic particles
should be kept away from the USB and USB-C plugs
and port.
WALT rechargeable tools with
e
English
9

Publicidad

loading

Este manual también es adecuado para:

Dcle14201r