Publicidad
Idiomas disponibles
Idiomas disponibles
English
TROUBLESHOOTING
The Laser Level Does Not Turn On (Fig. A)
•
Fully charge the battery.
•
If the laser level is exposed to extremely hot/cold
temperatures, the battery meter
to Hot and Cold Condition. If the laser level has
been stored in extremely hot temperatures, allow
it to cool. The laser level will not be damaged by
pressing the on/off button before cooling to its proper
operating temperature.
The Laser Beams Flash (Fig. L)
In manual slope mode, flashing will occur 3 times every
10 seconds regardless of tilt, to remind the user they are in
manual slope mode.
In unlocked mode, if the laser unit is tilted more than 4 °, the
unit will flash every second, to indicate that while they are in
self leveling mode, the unit is too tilted to properly self level.
THE FLASHING BEAMS CREATED BY THE LASER LEVEL
ARE NOT LEVEL OR PLUMB AND SHOULD NOT BE USED
FOR DETERMINING OR MARKING LEVEL OR PLUMB. Try
repositioning the laser level on a more level surface.
If the laser level battery has a low state of charge, the
beams will flash in a distinctive pattern of 3 quick flashes in
1 second, followed by constant light output for 4 seconds.
This flashing pattern indicates that the battery should
be recharged.
The Laser Beams Will Not Stop Moving
The laser level is a precision instrument. Therefore, if it is not
positioned on a stable (and motionless) surface, the laser
level will continue to try to find level. If the beam will not
stop moving, try placing the laser level on a more stable
surface. Also, try to make sure that the surface is relatively
flat, so that the laser level is stable.
16
10
will flash. Refer
Accessories (Fig. M)
The laser level is equipped with a 1/4"‑20 and 5/8"‑11
threads on the bottom of the unit to accommodate current
or future D
WALT accessories, such as a tripod.
e
Figure M shows an example of accessories that are sold
separately from these laser levels. Only use D
accessories specified for use with this product. Follow the
directions included with the accessory.
Laser Detector (Fig. N)
The laser detector
31
(sold separately) allows the laser line
to be detected at much further distances than the visible
range. Refer to the laser detector user manual for details on
proper usage.
DW0892 for the DCLE14201R red laser.
DW0892G for the DCLE14201G green laser.
WARNING: Since accessories, other than those offered
by D
WALT, have not been tested with this product,
e
use of such accessories with this laser level could be
hazardous. To reduce the risk of injury, only D
recommended accessories should be used with
this product.
If you need any assistance in locating any accessory,
please contact your nearest D
www.D
WALT.com.
e
Service and Repairs
nOTE: Disassembling the laser level will void all warranties
on the product.
The battery can be replaced by the D
To assure product SAFETY and RELIABILITY, repairs,
maintenance and adjustment should be performed
by authorized service centers. Service or maintenance
performed by unqualified personnel may result in a risk of
injury. To locate your nearest D
www.toolservicenet.com.
Warranty
Go to www.D
WALT.com for the latest
e
warranty information.
WALT
e
WALT
e
WALT dealer, or go to
e
WALT service centers.
e
WALT service center, go to
e
Publicidad
